Detailed Program of the 21st ISC 2022

A detailed program can be downloaded here.

Wednesday, 12th October - 2022-10-12

All times are local to Germany (CEST, UTC+02:00).
47.02
47.03
09:00
Exhibition
Topics
Opening of the 21st ISC
Opening of the 21st ISC
09:30
Welcome Speech
Topics
Plenary Talks I
Dr.-Ing. habil. Frank Bauer
Plenary Talks I
Dr.-Ing. habil. Frank Bauer
09:40
Scaling of radial seals
Prof. Dr.-Ing. Matthias Kröger
Technische Universität Freiberg
Institut für Maschinenelemente, Konstruktion und Fertigung
Freiberg, DE
10:05
Towards additively manufactured dynamic rod seals
Thomas Ebel, M.Eng.
Hochschule Emden-Leer
Faculty of Technology - Mechanical Engineering
Emden, DE
Prof. Dr. Matthias Graf
University of Applied Sciences "Hochschule Emden/Leer"
Maschinenbau
Emden, DE
10:30
Exhibition
Coffee break
Topics
Alternative Energy
Dr. Thomas Schwarz
Mechanical Seals
Andreas Hübner-Hecker
11:00
Sealing Solutions for Hydrogen Applications
Dr. Anna Berger
Frenzelit GmbH
R&D
Bad Berneck, DE
Dr.-Ing. Andreas Mierzwa
Frenzelit GmbH
business unit industry
Bad Berneck, DE
Influence of the installation environment on the operating behavior of mechanical seals
Prof. Dr.-Ing. Peter Waidner
seal-ing - the sealing doctor
Bamberg, DE
11:25
Static seals for hydrogen at high pressure
Dipl.-Ing. Dr. rer. nat., Lucian Pasieka
Eugen Seitz AG
R & D
Wetzikon, CH
Additive Manufacturing of Tungsten Carbide Surfaces with Extreme Wear Resistivity
Florian Koehn, M.Sc.
Aalen University
Research Institute for Innovative Surfaces
Aalen, DE
11:50
Tribological properties of PTFE sealing materials with regard to bio-hybrid fuels
Marius Hofmeister, M.aster.
Instiute for Fluid Power Drives and Systems
Aachen, DE
Mathias Grunewald, M.Sc.
RWTH Aachen University
Institute of Heat and Mass Transfer
Aachen, DE
12:15
Exhibition
Lunch break
Topics
Rotary Shaft Seals I
Prof. Dr.-Ing. Eberhard Bock
Reciprocating Seals
Martin Goerres
13:15
On the prediction of the lubrication condition of grease sealing rotary shaft seals
Susanne Hahn, M.Sc.
University of Stuttgart, Institute of Machine Components (IMA)
Sealing Technology
Stuttgart, DE
Condition monitoring of reciprocating seals
Dr. Boris Traber
Freudenberg Sealing Technologies FST GmbH
Technology & Innovation
Weinheim, DE
13:40
Characterization of radial shaft seal performance in contaminated environments
Dipl.-Ing. Tim Schollmayer
Technische Universität Kaiserslautern
Chair of Machine Elements, Gears and Tribology (MEGT)
Kaiserslautern, DE
Observations on Particle Wiping Behavior of Hydraulic Wipers
Dipl.-Ing. Gonzalo A. Barillas
Freudenberg Sealing Technologies GmbH
Lead Center Fluid Power Industry
Schwalmstadt, DE
14:05
Influence of dynamic eccentricity on the pumping rate of rotary shaft seals at sub-zero temperatures
Dipl.-Ing. Sumbat Bekgulyan
University of Stuttgart, Institute of Machine Components (IMA)
Sealing Technology
Stuttgart, DE
DEVELOPMENT OF A NOVEL WIPER SEAL TEST RIG AND VALIDATION OF WIPER SEAL PERFORMANCES
Seckin Semiz
Kastas Sealing Technologies
Research and Development
Izmir, TR
Cem Tanyeri
Kastas Sealing Technologies
Research and Development
Izmir, TR
14:30
Influence of Lubricants on the Thermal Behaviour of Rotary Shaft Seals
Dipl.-Ing. Simon Feldmeth
University of Stuttgart, Institute of Machine Components (IMA)
Sealing Technology
Stuttgart, DE
An empirical study on the breakaway friction and squeeze film effects of a polyurethane U-cup rod seal
Oliver Feuchtmüller, M.Sc.
University of Stuttgart, Institute of Machine Components (IMA)
Sealing Technology
STUTTGART, DE
15:00
Exhibition
Coffee break
Topics
Rotary Shaft Seals II
Prof. Dr.-Ing. Matthias Kröger
Static Seals
Prof. Dr. Alexander Riedl
15:30
Correlation between Wetting Properties and the Susceptibility to Wear of Rotary Shaft Sealing Systems
Philipp Fricker, M.Sc.
University of Stuttgart, Instiut of Machine Components (IMA)
Sealing Technology
Stuttgart, DE
Evaluation of gasket performance at cryogenic Temperature
Florian Werner, M.Sc.
Teadit International Produktions GmbH
Application Engineering
Köln, DE
15:55
Cost-efficient evaluation of elastomer-lubricant incompatibility under tribological loads equivalent to radial shaft seals
Laura Stubbe
Technische Universität Kaiserslautern
Kaiserslautern, DE
Gasket sealability test results in accordance to new test setup concerning Air Quality Control control act (“TA-Luft”)
Ralf Kulessa
Garlock GmbH
STATIC GASKETS - EUROPEAN NORMATIVES & DIN/EN STANDARDS
Neuss, DE
16:20
Formation of Macro Lead using plunge grinding – a kinematic approach
Georg Haffner
Institute of Machine Components/University of Stuttgart
Institute of Machine Components (IMA)
Stuttgart, DE
The Smart Flange Joint - Bolt Force Measurement with Foil Sensors
Philipp Lambertz, M.Sc.
FH Muenster - Center of Sealing Technologies
Department of Engineering Physics
Steinfurt, DE
16:45
Radial shaft seals failures investigation
Abdelhak Azzi
Poclain Hydraulics
Research and Technology
Verberie, FR
17:15
Exhibition
17:45
Topics
Conference Dinner
Conference Dinner
18:30
- 22:00
Conference dinner

Wednesday, 12th October - 2022-10-12

All times are local to Germany (CEST, UTC+02:00).
09:00 - 09:30
Exhibition
09:30 - 09:40
Welcome Speech
09:40 - 10:05
Scaling of radial seals
Prof. Dr.-Ing. Matthias Kröger, Freiberg , DE)
10:05 - 10:30
Towards additively manufactured dynamic rod seals
Thomas Ebel, M.Eng., Emden , DE)
Prof. Dr. Matthias Graf, Emden , DE)
10:30 - 11:00
47.02
Exhibition
47.03
Coffee break
11:00 - 11:25
47.02
Sealing Solutions for Hydrogen Applications
Dr. Anna Berger, Bad Berneck , DE)
Dr.-Ing. Andreas Mierzwa, Bad Berneck , DE)
47.03
Influence of the installation environment on the operating behavior of mechanical seals
Prof. Dr.-Ing. Peter Waidner, Bamberg , DE)
11:25 - 11:50
47.02
Static seals for hydrogen at high pressure
Dipl.-Ing. Dr. rer. nat., Lucian Pasieka, Wetzikon , CH)
47.03
Additive Manufacturing of Tungsten Carbide Surfaces with Extreme Wear Resistivity
Florian Koehn, M.Sc., Aalen , DE)
11:50 - 12:15
47.02
Tribological properties of PTFE sealing materials with regard to bio-hybrid fuels
Marius Hofmeister, M.aster., Aachen , DE)
Mathias Grunewald, M.Sc., Aachen , DE)
12:15 - 13:15
47.02
Exhibition
47.03
Lunch break
13:15 - 13:40
47.02
On the prediction of the lubrication condition of grease sealing rotary shaft seals
Susanne Hahn, M.Sc., Stuttgart , DE)
47.03
Condition monitoring of reciprocating seals
Dr. Boris Traber, Weinheim , DE)
13:40 - 14:05
47.02
Characterization of radial shaft seal performance in contaminated environments
Dipl.-Ing. Tim Schollmayer, Kaiserslautern , DE)
47.03
Observations on Particle Wiping Behavior of Hydraulic Wipers
Dipl.-Ing. Gonzalo A. Barillas, Schwalmstadt , DE)
14:05 - 14:30
47.02
Influence of dynamic eccentricity on the pumping rate of rotary shaft seals at sub-zero temperatures
Dipl.-Ing. Sumbat Bekgulyan, Stuttgart , DE)
47.03
DEVELOPMENT OF A NOVEL WIPER SEAL TEST RIG AND VALIDATION OF WIPER SEAL PERFORMANCES
Seckin Semiz, Izmir , TR)
Cem Tanyeri, Izmir , TR)
14:30 - 15:00
47.02
Influence of Lubricants on the Thermal Behaviour of Rotary Shaft Seals
Dipl.-Ing. Simon Feldmeth, Stuttgart , DE)
47.03
An empirical study on the breakaway friction and squeeze film effects of a polyurethane U-cup rod seal
Oliver Feuchtmüller, M.Sc., STUTTGART , DE)
15:00 - 15:30
47.02
Exhibition
47.03
Coffee break
15:30 - 15:55
47.02
Correlation between Wetting Properties and the Susceptibility to Wear of Rotary Shaft Sealing Systems
Philipp Fricker, M.Sc., Stuttgart , DE)
47.03
Evaluation of gasket performance at cryogenic Temperature
Florian Werner, M.Sc., Köln , DE)
15:55 - 16:20
47.02
Cost-efficient evaluation of elastomer-lubricant incompatibility under tribological loads equivalent to radial shaft seals
Laura Stubbe, Kaiserslautern , DE)
47.03
Gasket sealability test results in accordance to new test setup concerning Air Quality Control control act (“TA-Luft”)
Ralf Kulessa, Neuss , DE)
16:20 - 16:45
47.02
Formation of Macro Lead using plunge grinding – a kinematic approach
Georg Haffner, Stuttgart , DE)
47.03
The Smart Flange Joint - Bolt Force Measurement with Foil Sensors
Philipp Lambertz, M.Sc., Steinfurt , DE)
16:45 - 17:15
47.02
Radial shaft seals failures investigation
Abdelhak Azzi, Verberie , FR)
17:15 - 17:45
Exhibition
18:30 - 22:00
Conference dinner
Loading...

A cooperation of:

×

To install this Web App in your iPhone/iPad press and then Add to Home Screen.