Overview contributions 21st ISC
| Author | Title | DOI |
| Anna Berger | Sealing Solutions for Hydrogen Applications | https://doi.org/10.61319/OBVQ9R8B |
| Lucian Pasieka | Static seals for hydrogen at high pressure | https://doi.org/10.61319/0JYOCQCV |
| Marius Hofmeister | Tribological properties of PTFE sealing materials with regard to bio-hybrid fuels | https://doi.org/10.61319/M5U3Q9PW |
| Susanne Hahn | On the prediction of the lubrication condition of grease sealing rotary shaft seals | https://doi.org/10.61319/KBME2XRJ |
| Tim Schollmayer | Characterization of radial shaft seal performance in contaminated environments | https://doi.org/10.61319/VISOJXC6 |
| Sumbat Bekgulyan | Influence of dynamic eccentricity on the pumping rate of rotary shaft seals at sub-zero temperatures | https://doi.org/10.61319/9RN24IDM |
| Simon Feldmeth | Influence of Lubricants and Shaft Coatings on the Thermal Behaviour of Rotary Shaft Seals | https://doi.org/10.61319/6URTM5GB |
| Philipp Fricker | Correlation between Wetting Properties and the Susceptibility to Wear of Rotary Shaft Sealing Systems | https://doi.org/10.61319/GU93XB2N |
| Laura Stubbe | Cost-efficient evaluation of rubber-lubricant incompatibility under tribological loads equivalent to radial shaft seals | https://doi.org/10.61319/V17Q7XCP |
| Georg Haffner | Formation of Macro Lead Using Plunge Grinding – a Kinematic Approach | https://doi.org/10.61319/AXQC3IQE |
| Abdelhak Azzi | Radial shaft seal failure investigation | https://doi.org/10.61319/7VFRBZF7 |
| Roy Ovink | Digital twin for rubber seal manufacturing | https://doi.org/10.61319/C9RQQQM9 |
| Franz Schmeink | Sealing Solutions for Industrial Gear Units | https://doi.org/10.61319/EGDWKXKG |
| Silvio Schreymayer | Investigation of hydraulic fluid condition on seal performance | https://doi.org/10.61319/L233MVB7 |
| Kenya Yoshioka | Dynamic Dirt Deflectors for Friction Reduced Shaft Seals | https://doi.org/10.61319/S5ZFONVJ |
| Christoph Schüle | Axial seal for high-rpm application and poor lubrication | https://doi.org/10.61319/OZZSAFCE |
| Bas van der Vorst | Responding to sealing challenges in Electric Vehicles (EV) | https://doi.org/10.61319/V8V92GR1 |
| Jan Gölz | Validation cycles for electrical systems from a Seal’s perspective – Discussion of LV124 compared to established seal test sequences | https://doi.org/10.61319/D9QP47YB |
| Jannik Röttger | Formation of Micro Lead in Cylindrical Plunge Grinding | https://doi.org/10.61319/GJK4L42Q |
| Cora Leibig | 3D Printing Flexible Materials: Transcending Prototyping With Industrial Manufacturing | https://doi.org/10.61319/J4WN6Q1R |
| Cornelius Fehrenbacher | Thermoset Shaft Seals – A new Generation of Radial Shaft Seals | https://doi.org/10.61319/O2L5C8LY |
| Peter Waidner | Influence of the installation environment on the operating behavior of mechanical seals | https://doi.org/10.61319/XRNZOXJV |
| Florian Koehn | Tungsten Carbide-Cobalt: with 3D metal printing to wear-resistant coatings for technical applications | https://doi.org/10.61319/ACKACZ29 |
| Boris Traber | Condition monitoring of reciprocating seals | https://doi.org/10.61319/FNCU9FBU |
| Gonzalo A. Barillas | Observations on Particle Wiping Behaviour of Hydraulic Wipers | https://doi.org/10.61319/VM5ZUJ53 |
| Seckin Semiz | Development Of a Novel Wiper Seal Test Rig and Validation of Wiper Seal Performances | https://doi.org/10.61319/COL5IU5A |
| Oliver Feuchtmüller | An empirical study on the breakaway friction and squeeze film effects of a polyurethane U-cup rod seal | https://doi.org/10.61319/8Y9TYEE4 |
| Oliver Zach | Determination of the gasket characteristics at cryogenic temperatures | https://doi.org/10.61319/56SKCEHN |
| Ralf Kulessa | Gasket sealability test results in accordance to new test setup concerning Air Quality Control control act (“TA-Luft”) | https://doi.org/10.61319/I2XQNF78 |
| Philipp Lambertz | The Smart Flange Joint – Bolt Force Measurement with Foil Sensors | https://doi.org/10.61319/PY6ONUXR |
| Niklas Bauer | Experimental determination and EHL simulation of transient friction of pneumatic seals in spool valves | https://doi.org/10.61319/HSQZWREG |
| Lisa-Marie Schänzel | Component-based Modular System Modelling of a Spool Valve | https://doi.org/10.61319/TXZ8NZDF |
| Dirk Möhring | Design for contact lubrication of large seals | https://doi.org/10.61319/YBYM3FFE |
| Christoph Wehmann | Modeling the Compression Set of Elastomers to Predict the Lifetime of Sealing Systems by Finite Element Analysis | https://doi.org/10.61319/RZB4JUN7 |
| Lukas Merkle | Sealing Systems under Starved Lubrication Conditions | https://doi.org/10.61319/313EHZ1Q |
| Sumbat Bekgulyan |
Regenerative Thermoplastic Polyurethane for Hydraulic Rod Seals – Time-Accelerated Testing | https://doi.org/10.61319/BA0SZ3P9 |
| Fabian Kaiser | Interactions between elastomer fillers, strain, surface properties and friction | https://doi.org/10.61319/O2L5C8LY |
| Bernhard Richter | Prediction of the functional limits of seals at low temperatures | https://doi.org/10.61319/XNO1TGGY |
| Cem Tanyeri | Simulation of Composite Guiding Elements with Analysis Programs | https://doi.org/10.61319/FGRJSANM |
| Sylvain Nadiama | Seal virtual optimization for enhanced sustainability | https://doi.org/10.61319/2YRQOKLG |
| Nino Dakov | Benefits and Applications of EHL Analysis in Sealing Technology on the Example of a Hydraulic Step-Seal | https://doi.org/10.61319/GTNCA8DN |
| Peter Waidner | Tribology of dynamic seals on a nanoscale – where does this lead? | https://doi.org/10.61319/ORTRQ9K9 |
| Matthias Kröger | Scaling of radial seals | https://doi.org/10.61319/6Y5KJZJN |
| Matthias Graf | Towards additively manufactured dynamic rod seals | https://doi.org/10.61319/W7SZ07FJ |